dmesg - Gigabyte AMD Radeon HD 7700
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0 (root@Geo) (gcc version 5.4.1 20160803 (Debian 5.4.1-1) ) #2 SMP Sun Oct 9 16:56:10 CEST 2016
tseg: 006f000000
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000006d085fff] usable
BIOS-e820: [mem 0x000000006d086000-0x000000006d0b5fff] reserved
BIOS-e820: [mem 0x000000006d0b6000-0x000000006d378fff] usable
BIOS-e820: [mem 0x000000006d379000-0x000000006d447fff] ACPI NVS
BIOS-e820: [mem 0x000000006d448000-0x000000006e1d3fff] reserved
BIOS-e820: [mem 0x000000006e1d4000-0x000000006e1d4fff] usable
BIOS-e820: [mem 0x000000006e1d5000-0x000000006e3dafff] ACPI NVS
BIOS-e820: [mem 0x000000006e3db000-0x000000006e850fff] usable
BIOS-e820: [mem 0x000000006e851000-0x000000006efe1fff] reserved
BIOS-e820: [mem 0x000000006efe2000-0x000000006effffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000024effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A78M-HD2, BIOS FB 04/27/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x24f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000070000000 mask FFFFF0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000024f000000 aka 9456M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0x70000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x6f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd6f0-0x000fd6ff] mapped at [ffff8800000fd6f0]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x01d27000, 0x01d27fff] PGTABLE
BRK [0x01d28000, 0x01d28fff] PGTABLE
BRK [0x01d29000, 0x01d29fff] PGTABLE
BRK [0x01d2a000, 0x01d2afff] PGTABLE
BRK [0x01d2b000, 0x01d2bfff] PGTABLE
BRK [0x01d2c000, 0x01d2cfff] PGTABLE
RAMDISK: [mem 0x23156000-0x2d8a2fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x000000006D3FD088 00008C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000006D4030E0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
ACPI: DSDT 0x000000006D3FD1A8 005F33 (v02 ALASKA A M I 00000088 INTL 20051117)
ACPI: FACS 0x000000006D43D080 000040
ACPI: APIC 0x000000006D4031F0 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000006D403270 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000006D4032B8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x000000006D4032F8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: WDRT 0x000000006D403330 000047 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: IVRS 0x000000006D403378 000078 (v02 AMD BANTRY 00000001 AMD 00000000)
ACPI: SSDT 0x000000006D4033F0 000EE4 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x000000006D4042D8 00033B (v02 AMD BANTRY 00000002 MSFT 04000000)
ACPI: CRAT 0x000000006D404618 000550 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x000000006D404B68 0016E2 (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: SSDT 0x000000006D406250 001519 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: SSDT 0x000000006D407770 000852 (v01 AMD CPMDFDGP 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000024effffff]
NODE_DATA(0) allocated [mem 0x24eff7000-0x24effafff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000024effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000006d085fff]
node 0: [mem 0x000000006d0b6000-0x000000006d378fff]
node 0: [mem 0x000000006e1d4000-0x000000006e1d4fff]
node 0: [mem 0x000000006e3db000-0x000000006e850fff]
node 0: [mem 0x000000006efe2000-0x000000006effffff]
node 0: [mem 0x0000000100000000-0x000000024effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000024effffff]
On node 0 totalpages: 1820539
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 6944 pages used for memmap
DMA32 zone: 444382 pages, LIFO batch:31
Normal zone: 21440 pages used for memmap
Normal zone: 1372160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x6d086000-0x6d0b5fff]
PM: Registered nosave memory: [mem 0x6d379000-0x6d447fff]
PM: Registered nosave memory: [mem 0x6d448000-0x6e1d3fff]
PM: Registered nosave memory: [mem 0x6e1d5000-0x6e3dafff]
PM: Registered nosave memory: [mem 0x6e851000-0x6efe1fff]
PM: Registered nosave memory: [mem 0x6f000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x6f000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff88024ec00000 s92952 r8192 d29928 u524288
pcpu-alloc: s92952 r8192 d29928 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1792070
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 6915724K/7282156K available (5690K kernel code, 1066K rwdata, 2772K rodata, 1296K init, 828K bss, 366432K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:1000 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3892.995 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7785.99 BogoMIPS (lpj=15571980)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff81c50000 - ffffffff81c56000)
ftrace: allocating 23732 entries in 93 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G (family: 0x15, model: 0x38, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (31143.96 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x6d379000-0x6d447fff] (847872 bytes)
PM: Registering ACPI NVS region [mem 0x6e1d5000-0x6e3dafff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
pci 0000:00:01.0: [1002:130f] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
pci 0000:00:02.1: [1022:1425] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb6a000-0xfeb6bfff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb71000-0xfeb717ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb70000-0xfeb70fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb6f000-0xfeb6f0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb6e000-0xfeb6efff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb6c000-0xfeb6cfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
pci 0000:01:00.0: [1002:6719] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa80] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfe900000-0xfe900fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xb0000000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:01.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x6d086000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6d379000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6e1d5000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6e851000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6f000000-0x6fffffff]
e820: reserve RAM buffer [mem 0x24f000000-0x24fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x70000000-0xafffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0220-0x0227] has been reserved
system 00:03: [io 0x0228-0x0237] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x040b] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c51] has been reserved
system 00:08: [io 0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cd1] has been reserved
system 00:08: [io 0x0cd2-0x0cd3] has been reserved
system 00:08: [io 0x0cd4-0x0cd5] has been reserved
system 00:08: [io 0x0cd6-0x0cd7] has been reserved
system 00:08: [io 0x0cd8-0x0cdf] has been reserved
system 00:08: [io 0x0800-0x089f] could not be reserved
system 00:08: [io 0x0b20-0x0b3f] has been reserved
system 00:08: [io 0x0900-0x090f] has been reserved
system 00:08: [io 0x0910-0x091f] has been reserved
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:08: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:08: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:03: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:03: resource 10 [mem 0xb0000000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 171316K (ffff880023156000 - ffff88002d8a3000)
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1 at drivers/iommu/amd_iommu_init.c:2301 amd_iommu_pc_get_set_reg_val+0xa3/0xd0()
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.4.0 #2
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A78M-HD2, BIOS FB 04/27/2015
0000000000000000 0000000026614727 ffffffff812e3a79 0000000000000000
ffffffff8107404d ffff880246148000 0000000000000040 ffffffff81b2d981
0000000000000000 0000000000000000 ffffffff813ed1c3 ffffffff81b65b1e
Call Trace:
[] ? dump_stack+0x40/0x57
[] ? warn_slowpath_common+0x7d/0xb0
[] ? memblock_find_dma_reserve+0x17b/0x17b
[] ? amd_iommu_pc_get_set_reg_val+0xa3/0xd0
[] ? iommu_go_to_state+0x4de/0x1376
[] ? kvasprintf+0x76/0xa0
[] ? memblock_find_dma_reserve+0x17b/0x17b
[] ? amd_iommu_init+0xe/0x1fb
[] ? memblock_find_dma_reserve+0x17b/0x17b
[] ? pci_iommu_init+0xe/0x37
[] ? do_one_initcall+0xb2/0x200
[] ? parse_args+0x2a1/0x4b0
[] ? kernel_init_freeable+0x16c/0x205
[] ? rest_init+0x80/0x80
[] ? kernel_init+0xa/0xe0
[] ? ret_from_fork+0x3f/0x70
[] ? rest_init+0x80/0x80
---[ end trace bdce74660f98b6c3 ]---
AMD-Vi: Unable to write to IOMMU perf counter.
iommu: Adding device 0000:00:01.0 to group 0
iommu: Using direct mapping for device 0000:00:01.0
iommu: Adding device 0000:00:01.1 to group 0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Adding device 0000:00:02.1 to group 1
iommu: Adding device 0000:00:03.0 to group 2
iommu: Adding device 0000:00:03.1 to group 2
iommu: Adding device 0000:00:04.0 to group 3
iommu: Adding device 0000:00:10.0 to group 4
iommu: Adding device 0000:00:10.1 to group 4
iommu: Adding device 0000:00:11.0 to group 5
iommu: Adding device 0000:00:12.0 to group 6
iommu: Adding device 0000:00:12.2 to group 6
iommu: Adding device 0000:00:13.0 to group 7
iommu: Adding device 0000:00:13.2 to group 7
iommu: Adding device 0000:00:14.0 to group 8
iommu: Adding device 0000:00:14.1 to group 8
iommu: Adding device 0000:00:14.2 to group 8
iommu: Adding device 0000:00:14.3 to group 8
iommu: Adding device 0000:00:14.4 to group 9
iommu: Adding device 0000:00:14.5 to group 10
iommu: Adding device 0000:00:18.0 to group 11
iommu: Adding device 0000:00:18.1 to group 11
iommu: Adding device 0000:00:18.2 to group 11
iommu: Adding device 0000:00:18.3 to group 11
iommu: Adding device 0000:00:18.4 to group 11
iommu: Adding device 0000:00:18.5 to group 11
iommu: Adding device 0000:01:00.0 to group 1
iommu: Adding device 0000:01:00.1 to group 1
iommu: Adding device 0000:02:00.0 to group 2
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features: PPR GT IA PC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Lazy IO/TLB flushing enabled
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000001ff)
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1477890654.648:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.1: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: CPU0: patch_level=0x06003106
microcode: CPU1: patch_level=0x06003106
microcode: CPU2: patch_level=0x06003106
microcode: CPU3: patch_level=0x06003106
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
zswap: loaded using pool lzo/zbud
rtc_cmos 00:06: setting system clock to 2016-10-31 05:10:55 UTC (1477890655)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1296K (ffffffff81b0c000 - ffffffff81c50000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 444K (ffff880001591000 - ffff880001600000)
Freeing unused kernel memory: 1324K (ffff8800018b5000 - ffff880001a00000)
random: systemd-udevd urandom read with 4 bits of entropy available
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c66000, 40:8d:5c:4d:8f:42, XID 0c900800 IRQ 28
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0 xhci-hcd
usb usb1: SerialNumber: 0000:00:10.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0 xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
libata version 3.00 loaded.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0 xhci-hcd
usb usb3: SerialNumber: 0000:00:10.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0 xhci-hcd
usb usb4: SerialNumber: 0000:00:10.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6f000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.4.0 ehci_hcd
usb usb5: SerialNumber: 0000:00:12.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6d000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 4.4.0 ehci_hcd
usb usb6: SerialNumber: 0000:00:13.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ahci 0000:00:11.0: version 3.0
ohci-pci: OHCI PCI platform driver
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71100 irq 38
ata2: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71180 irq 39
ata3: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71200 irq 40
ata4: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71280 irq 41
scsi host4: pata_atiixp
scsi host5: pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb70000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.4.0 ohci_hcd
usb usb7: SerialNumber: 0000:00:12.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6e000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 4.4.0 ohci_hcd
usb usb8: SerialNumber: 0000:00:13.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb6c000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 4.4.0 ohci_hcd
usb usb9: SerialNumber: 0000:00:14.5
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-2: New USB device found, idVendor=04e8, idProduct=61b6
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: Samsung M3 Portable
usb 4-2: Manufacturer: Samsung M3 Portable
usb 4-2: SerialNumber: AFAC7DF1070000B8
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 8-4: new low-speed USB device number 2 using ohci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: KINGSTON SV300S37A240G, 603ABBF0, max UDMA/133
ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
PM: Hibernation image partition 8:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
PM: Marking nosave pages: [mem 0x6d086000-0x6d0b5fff]
PM: Marking nosave pages: [mem 0x6d379000-0x6e1d3fff]
PM: Marking nosave pages: [mem 0x6e1d5000-0x6e3dafff]
PM: Marking nosave pages: [mem 0x6e851000-0x6efe1fff]
PM: Marking nosave pages: [mem 0x6f000000-0xffffffff]
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
tsc: Refined TSC clocksource calibration: 3893.157 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x703c349bac5, max_idle_ns: 881590950941 ns
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
usb 8-4: New USB device found, idVendor=046d, idProduct=c30e
usb 8-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-4: Product: HID compliant keyboard
usb 8-4: Manufacturer: Logitech
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: vboxweb.service: Cannot add dependency job, ignoring: Unit vboxweb.service is masked.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice System Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Journal Service...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting LSB: Prepare console...
systemd[1]: Starting LSB: VirtualBox Linux X11 Additions...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
usb 8-5: new low-speed USB device number 3 using ohci-pci
pore:registration was successful.
Power Profiler:version is 5.10-3
Power Profiler:device name: amdtPwrProf, major device number: 249.
VFIO - User Level meta-driver version: 0.3
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=io+mem:owns=none
systemd[1]: Started LVM2 metadata daemon.
systemd[1]: Started Journal Service.
vfio_pci: add [1002:6719[ffff:ffff]] class 0x000000/00000000
vfio_pci: add [1002:aa80[ffff:ffff]] class 0x000000/00000000
usb 8-5: New USB device found, idVendor=046d, idProduct=c01e
usb 8-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-5: Product: USB-PS/2 Optical Mouse
usb 8-5: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb8/8-4/8-4:1.0/0003:046D:C30E.0001/input/input2
systemd-journald[207]: Received request to flush runtime journal from PID 1
input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb8/8-4/8-4:1.1/0003:046D:C30E.0002/input/input3
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: acpi_idle registered with cpuidle
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:02: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
hid-generic 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:13.0-4/input0
acpi-cpufreq: overriding BIOS provided _PSD data
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
ACPI: Power Button [PWRB]
hid-generic 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:13.0-4/input1
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
acpi device:04: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:03/LNXVIDEO:01/input/input7
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb8/8-5/8-5:1.0/0003:046D:C01E.0003/input/input8
hid-generic 0003:046D:C01E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-5/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PC Speaker as /devices/platform/pcspkr/input/input9
[drm] Initialized drm 1.1.0 20060810
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Error: Driver 'pcspkr' is already registered, aborting...
scsi 6:0:0:0: Direct-Access Samsung M3 Portable 1301 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 33 00 00 08
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sd 6:0:0:0: [sdb] Attached SCSI disk
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11
Adding 7811068k swap on /dev/sda1. Priority:-1 extents:1 across:7811068k SSFS
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[drm] amdgpu kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
Found CRAT image with size=1360
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=4 id_base=16
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU GPU: simds=32 id_base=-2147483648
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=17
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=19
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
[drm] initializing kernel modesetting (KAVERI 0x1002:0x130F 0x1458:0xD000 0xD4).
[drm] register mmio base: 0xFEB00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: 113
amdgpu 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
amdgpu 0000:00:01.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 3578040 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 1024M of VRAM memory ready
[drm] amdgpu: 1024M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
amdgpu 0000:00:01.0: amdgpu: using MSI.
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] amdgpu: irq initialized.
[drm] Internal thermal controller without fan control
[drm] amdgpu: dpm initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x1954 0x1954 0x1955 0x1955 0x1956 0x1956 0x1957 0x1957
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] HPD2
[drm] DDC: 0x1950 0x1950 0x1951 0x1951 0x1952 0x1952 0x1953 0x1953
[drm] Encoders:
[drm] CRT1: INTERNAL_UNIPHY3
[drm] CRT1: NUTMEG
amdgpu 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000010, cpu addr 0xffff880240fcf010
amdgpu 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000020, cpu addr 0xffff880240fcf020
amdgpu 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000030, cpu addr 0xffff880240fcf030
amdgpu 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000040, cpu addr 0xffff880240fcf040
amdgpu 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000050, cpu addr 0xffff880240fcf050
amdgpu 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000040000060, cpu addr 0xffff880240fcf060
amdgpu 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000070, cpu addr 0xffff880240fcf070
amdgpu 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000080, cpu addr 0xffff880240fcf080
amdgpu 0000:00:01.0: fence driver on ring 8 use gpu addr 0x0000000040000090, cpu addr 0xffff880240fcf090
amdgpu 0000:00:01.0: fence driver on ring 9 use gpu addr 0x00000000400000a0, cpu addr 0xffff880240fcf0a0
amdgpu 0000:00:01.0: fence driver on ring 10 use gpu addr 0x00000000400000b0, cpu addr 0xffff880240fcf0b0
[drm] Found UVD firmware Version: 1.55 Family ID: 9
amdgpu 0000:00:01.0: fence driver on ring 11 use gpu addr 0x000000000027cdb0, cpu addr 0xffffc90002838db0
[drm] Found VCE firmware Version: 50.10 Binary ID: 2
amdgpu 0000:00:01.0: fence driver on ring 12 use gpu addr 0x00000000400000d0, cpu addr 0xffff880240fcf0d0
amdgpu 0000:00:01.0: fence driver on ring 13 use gpu addr 0x00000000400000e0, cpu addr 0xffff880240fcf0e0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[drm] ring test on 0 succeeded in 10 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] ring test on 8 succeeded in 2 usecs
[drm] ring test on 9 succeeded in 3 usecs
[drm] ring test on 10 succeeded in 3 usecs
[drm] ring test on 11 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 12 succeeded in 18 usecs
[drm] ring test on 13 succeeded in 4 usecs
[drm] VCE initialized successfully.
clocksource: Switched to clocksource tsc
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
[drm] fb mappable at 0xB0529000
[drm] vram apper at 0xB0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3893156829 Hz
vboxdrv: Successfully loaded version 5.0.12 (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU found
Console: switching to colour frame buffer device 240x67
amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded in 0 usecs
[drm] ib test on ring 6 succeeded in 0 usecs
[drm] ib test on ring 7 succeeded in 0 usecs
[drm] ib test on ring 8 succeeded in 0 usecs
[drm] ib test on ring 9 succeeded in 0 usecs
[drm] ib test on ring 10 succeeded in 0 usecs
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.VGA.ATC0] (Node ffff8802470c17e8), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.PCI0.VGA.ATCS] (Node ffff8802470c1810), AE_NOT_FOUND (20150930/psparse-542)
kfd kfd: Allocated 3944480 bytes on gart for device(1002:130f)
kfd kfd: added device (1002:130f)
[drm] Initialized amdgpu 3.1.0 20150101 for 0000:00:01.0 on minor 0
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
device eth0 entered promiscuous mode
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
r8169 0000:02:00.0 eth0: link up
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=io+mem:owns=none
vgaarb: device changed decodes: PCI:0000:00:01.0,olddecodes=io+mem,decodes=none:owns=io+mem
random: nonblocking pool is initialized
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered forwarding state
br0: port 2(vnet0) entered forwarding state
vfio-pci 0000:01:00.0: enabling device (0000 -> 0003)
kvm: zapping shadow pages for mmio generation wraparound
kvm: zapping shadow pages for mmio generation wraparound
kvm [2245]: vcpu0 unhandled rdmsr: 0xc0011021
kvm [2245]: vcpu1 unhandled rdmsr: 0xc0011021
vfio-pci 0000:01:00.1: irq bypass producer (token ffff880241286380) registration fails: -22
vfio-pci 0000:01:00.0: irq bypass producer (token ffff880241646f40) registration fails: -22
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
capability: warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
SUPR0GipMap: fGetGipCpu=0x3
vboxdrv: ffffffffa0935020 VMMR0.r0
vboxdrv: ffffffffa0a2f020 VBoxDDR0.r0
vboxdrv: ffffffffa0102020 VBoxDD2R0.r0
vboxpci: created IOMMU domain ffff88010cc1e220
vboxpci: freeing IOMMU domain ffff88010cc1e220
vboxdrv: ffffffffa0935020 VMMR0.r0
vboxdrv: ffffffffa0a2f020 VBoxDDR0.r0
vboxdrv: ffffffffa0102020 VBoxDD2R0.r0
vboxpci: created IOMMU domain ffff88022dc99e20
vboxpci: freeing IOMMU domain ffff88022dc99e20
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered forwarding state
br0: port 2(vnet0) entered forwarding state
vfio-pci 0000:01:00.1: enabling device (0400 -> 0402)
kvm: zapping shadow pages for mmio generation wraparound
kvm: zapping shadow pages for mmio generation wraparound
kvm [10739]: vcpu0 unhandled rdmsr: 0xc0011021
kvm [10739]: vcpu1 unhandled rdmsr: 0xc0011021
vfio-pci 0000:01:00.1: irq bypass producer (token ffff88023eec0500) registration fails: -22
vfio-pci 0000:01:00.0: irq bypass producer (token ffff88010930a340) registration fails: -22